1 of 5 041002 features automatically restarts microprocessor after power failure maintains reset for 350 ms after v cc returns to an in-tolerance condition accurate 5%, 10% or 15% microprocessor 5v power supply monitoring reduces need for discrete components precision temperature-compensated voltage reference and voltage sensor low-cost to-92 package or surface mount sot-223 package internal 5 k pull-up resistor compatible with motorola 68xxx series and hc16 microprocessors operating temperature of -40c to +85c pin assignment pin description pin 1 ground pin 2 reset pin 3 v cc pin 4 ground (sot-223 only) description the ds1233d econoreset uses a preci sion temperature-compensated refe rence and comparator circuit to monitor the status of the power supply (v cc ). when an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. when v cc returns to an in-tolerance condition, the reset signal is kept in the active stat e for approximately 350 ms to allow the power supply and processor to stabilize. operation - power monitor the ds1233d provides the functions of detecting out -of-tolerance power supply conditions and warning a processor-based system of impending power failure. when v cc is detected as out of tolerance as defined by the tolerance of the part selected, the rst signal is asserted. on power-up, rst is kept active for approximately 350 ms after the power supply has re ached the selected tolerance. this allows the power supply and microproce ssor to stabilize before rst is released. ds1233d 5v econoreset www.maxim-ic.com 1 2 3 1 2 3 bottom view to-92 package see mech. drawings section on website 2 3 4 top view sot-23 package see mech. drawings section on website 1 dallas ds1233 econo reset
ds1233d 2 of 5 block diagram figure 1 application example figure 2
ds1233d 3 of 5 power up figure 3 power down figure 4
ds1233d 4 of 5 absolute maximum ratings* voltage on v cc pin relative to ground -0.5v to +7.0v voltage on i/o relative to ground -0.5v to v cc +0.5v operating temperature -40c to +85c storage temperature -55c to +125c soldering temperature 260c for 10 seconds * this is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. exposure to absolute maximum rating conditions for extended periods of time may affect reliability. recommended dc operating conditions (-40 c to +85 c) parameter symbol min typ max units notes supply voltage v cc 1.2 5.0 5.5 v 1 dc electrical characteristics (-40 c to +85 c; v dd =5v 10%) parameter symbol min typ max units notes low level @ rst v ol 0.4 v 1 output current @ 0.4v i ol +8 ma 2 operating current i cc 50 a v cc trip point 5% v cctp1 4.5 4.625 4.74 v 1 v cc trip point 10% v cctp2 4.25 4.375 4.49 v 1 v cc trip point 15% v cctp3 4.0 4.125 4.24 v 1 output capacitance c out 10 pf internal pull-up resistor r p 3.75 5 6.25 k ac electrical characteristics (-40 c to +85 c; v cc =5v 10%) parameter symbol min typ max units notes reset active time t rst 250 350 450 ms v cc detect to rst t rpd 100 ns v cc slew rate (4.75v - 4.00v) t f 300 s v cc slew rate (4.00v - 4.75v) t r 0ns v cc detect to rst t rpu 250 350 450 ms notes: 1. all voltages are referenced to ground. 2. a 1 k external resistor may be required for proper operation of the microprocessor reset control circuit.
ds1233d 5 of 5 econoreset selec tion guide vcc trip point pushbutton detect min typ max min typ max ds1233-15 4.0 4.125 4.24 2.4 - 3.3 ds1233-10 4.25 4.375 4.49 2.4 - 3.3 ds1233-5 4.5 4.625 4.75 2.4 - 3.3 ds1233d-15 4.0 4.125 4.24 n/a n/a ds1233d-10 4.25 4.375 4.49 n/a n/a ds1233d-5 4.5 4.625 4.75 n/a n/a ds1833-15 4.0 4.125 4.24 n/a n/a ds1833-10 4.25 4.375 4.49 n/a n/a 5v ds1833-5 4.5 4.625 4.75 n/a n/a ds1233a-15 2.64 2.72 2.80 1.8 - 3.0 3.3v ds1233a-10 2.8 2.88 2.97 1.8 - 3.0
e nglish ? ???? ? ??? ? ??? what's ne w p roducts solutions de sign ap p note s sup p ort buy comp any me mbe rs ds1233d part number table notes: see the ds1233d quickview data sheet for further information on this product family or download the ds1233d full data sheet (pdf, 128kb). 1. other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales . 2. didn't find what you need? ask our applications engineers. expert assistance in finding parts, usually within one business day. 3. part number suffixes: t or t&r = tape and reel; + = rohs/lead-free; # = rohs/lead-exempt. more: see full data sheet or part naming c onventions . 4. * some packages have variations, listed on the drawing. "pkgc ode/variation" tells which variation the product uses. 5. part number notes free sample buy direct package: type pins size drawing code/var * temp rohs/lead-free? materials analysis ds1233dz-5/t&r/c 07 st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233dz-5/t&r/c 06 st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233dz-5/t&r/c 03 st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233dz-15/t&r/c 02 -40c to +85c rohs/lead-free: no ds1233dz-5 5v-5% monitor st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis DS1233DZ-10 5v-10% monitor st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233dz-15 5v-15% monitor st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis DS1233DZ-10+t&r 5v-10% 2500/reel st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3+1 * -40c to +85c rohs/lead-free: yes materials analysis
ds1233dz-15+t&r 5v-15% 2500/reel st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233dz-5+t&r 5v-5% 2500/reel st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233dz-5+ st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233dz-15/t&r 5v-15% 2500/reel st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis DS1233DZ-10/t&r 5v-10% 2500/reel st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233dz-5/t&r 5v-5% 2500/reel st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3-1 * -40c to +85c rohs/lead-free: no materials analysis DS1233DZ-10+ st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233dz-15+ st223;3 pin;137 dwg: 56-g0005-001a (pdf) use pkgcode/variation: k3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233d-5+t&r 5v-5% 2000/reel to92;3 pin;185 dwg: 56-g0006-003a (pdf) use pkgcode/variation: q3+4 * 0c to +70c rohs/lead-free: yes materials analysis ds1233d-5/t&r 5v-5%, 2000/reel to92;3 pin;185 dwg: 56-g0006-003a (pdf) use pkgcode/variation: q3-4 * 0c to +70c rohs/lead-free: no materials analysis ds1233d-15 5v-15% monitor to92;3 pin;185 dwg: 56-g0006-001a (pdf) use pkgcode/variation: q3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233d-15/t&r 5v-15%, 2000/reel to92;3 pin;185 dwg: 56-g0006-003a (pdf) use pkgcode/variation: q3-4 * -40c to +85c rohs/lead-free: no materials analysis ds1233d-10+ to92;3 pin;185 dwg: 56-g0006-001a (pdf) use pkgcode/variation: q3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233d-5+ to92;3 pin;185 dwg: 56-g0006-001a (pdf) use pkgcode/variation: q3+1 * -40c to +85c rohs/lead-free: yes materials analysis ds1233d-10/t&r 5v-10% 2000/reel to92;3 pin;185 dwg: 56-g0006-003a (pdf) use pkgcode/variation: q3-4 * -40c to +85c rohs/lead-free: no materials analysis ds1233d-5 5v-5% monitor to92;3 pin;185 dwg: 56-g0006-001a (pdf) use pkgcode/variation: q3-1 * -40c to +85c rohs/lead-free: no materials analysis
ds1233d-10 5v-10% monitor to92;3 pin;185 dwg: 56-g0006-001a (pdf) use pkgcode/variation: q3-1 * -40c to +85c rohs/lead-free: no materials analysis ds1233d-15+t&r 5v-15% 2000/reel to92;3 pin;185 dwg: 56-g0006-003a (pdf) use pkgcode/variation: q3+4 * -40c to +85c rohs/lead-free: yes materials analysis ds1233d-10+t&r 5v-10% 2000/reel to92;3 pin;185 dwg: 56-g0006-003a (pdf) use pkgcode/variation: q3+4 * -40c to +85c rohs/lead-free: yes materials analysis ds1233d-15+ to92;3 pin;185 dwg: 56-g0006-001a (pdf) use pkgcode/variation: q3+1 * -40c to +85c rohs/lead-free: yes materials analysis didn't find what you need? c ontac t us: send us an email c opyright 2 0 0 7 by m axim i ntegrated p roduc ts , dallas semic onduc tor ? legal n otic es ? p rivac y p olic y
|
